Programming A Prius Fob For Door Locking

Insert and remove the remote transmitter from the ignition switch slot.

Programming a prius fob for door locking.

System should now lock and unlock vehicle once to confirm registration twice to indicate registration has failed. Insert the remote transmitter into the ignition switch slot and close the driver s door. Now if successful car responds with locking unlocking once implying this new fob is now programmed paired with this car. The prius should respond by locking unlocking the doors.

Within 3 seconds the door locks should lock and then unlock once indicating successful programming. Do not depress brake pedal whilst carrying out the following operation. Press both buttons on new the fob simultaneously and hold both down for a second and a half. Then say 1 second after the car stops locking unlocking due to step above press down both buttons of the old fob simultaneously then say after 1 second press the lock button of the new fob.

If you have a second key remote and you haven t already done so check to make sure this works so you can be certain it isn t a problem with the door lock functionality. Immediately after letting go of the lock and unlock buttons press the lock button by itself and hold for 2 seconds. Press the lock and unlock buttons on the remote simultaneously for 1 5 seconds. The door should lock and unlock.

Within three seconds of releasing the buttons press just the lock button. Note a maximum of 4 remote transmitters can be programmed. Close and open driver s door twice. To exit programming mode.

If you are programming multiple remotes repeat step 8 for each remote within 40 seconds of step 7. Then press the lock button for up to three seconds and release. This verifies that the new fob is working. Learn how to program the door lock settings on your new toyota.

To program the new toyota key fob hold the unlock and lock button on the key fob for two seconds and then release.